Bubba, a vagabond sailor and occasionally published writer wanders the East Coast and Bahamas aboard sv Ruth Ann, a Bayfield 29.
Wednesday, May 12, 2010
Call of Ports :: Ports of Call
In the last couple weeks, I decided to bite the bullet and get new ports. I knew I had to, really. In an effort to hit a price point in the 1970's, Cape Dory installed plastic ports rather than bronze on their 28 footer; my model boat. After a couple years, with the plastic ports somewhat unpopular and likely making little difference on the overall price, Cape Dory went back to bronze. My ports were showing their age and one was damaged. For a water tight cabin, in the rain or in a storm at sea, I needed to replace the ports.
I removed the old ports and began replacing some soggy wooden spacers with epoxy. This week, I ordered three car payments worth of new ports. Bronze was out of the question because of the cost. I ordered six 5" x 12" Tri Matrix ports from New Found Metals in Port Townsend, WA. The company rents out a drill template and sells the appropriate counterbore. The ports are reinforced composite with stainless steel hardware. It will be nice to have bristol looking ports with fresh screens. I still have to replace two larger ports but I'm having trouble finding something the same size. This may require some fiberglass work on the cabin to accomodate ports that are smaller in one or the other dimension.
Also last week, I mapped out all the backing plates I need for deck hardware. Cape Dory has a good reputation for building very solid boats. I have not, however, been impressed with the way my deck hardware is attached. In almost all cases, backing of deck hardware was either inadequate or nonexistent. It was this latter that concerned me the most. I have cut out plywood and hardboard blanks that will be epoxy coated and then laminated together for proper backing.
In other small news, I ripped out the cabinetry in the head. The sink countertop was rotten from one of those leaky ports, and the medicine cabinet was in the way of getting at the chainplate bolts. The face of the hanging locker may be next. It, like the other cabinetry, is in teak-ish paneling and is kind of dark. I may add some white panels here and also in the main cabin to brighten up the place.
Here's keeping my fingers crossed for good weather on Thursdays and Fridays.
Subscribe to:
Post Comments (Atom)
Homeward Epilogue
sv Ruth Ann in Beaufort, SC, 12/23 Ruth Ann is the last in a series of boats on which I was attempting to escape. I found her when I found a...
-
After almost 2500 miles of driving, I was finally in Wilmington; finally back where the boat was. I could finally get to work getting her b...
-
Aveling & Porter Steamroller Frank Perkins and Charles Chapman were working on a high speed, lightweight diesel engine at Aveling ...
-
First Impressions This is Part Two of a series. The Other Parts: Part One Part Three Part Four Part Five It’s an occupat...
No comments:
Post a Comment